CPU: LGA1851 socket: Support for Intel\u00ae Core\u2122 Ultra Processors<\/p>\n
Chipset: Intel\u00ae Z890 Express Chipset<\/p>\n
Memory: Support for DDR5 8800(O.C) \/ 8600(O.C) \/ 8400(O.C) \/ 8266(O.C) \/ 8200(O.C) \/ 8000(O.C) \/ 7950(O.C) \/ 7900(O.C) \/ 7800(O.C) \/ 7600(O.C.) \/ 7400(O.C.) \/ 7200(O.C.) \/ 7000(O.C.) \/ 6800(O.C.) \/ 6600(O.C.) \/ 6400 \/ 6200 \/ 6000 \/ 5800 \/ 5600MT\/s memory modules.
\n4 x DDR5 DIMM sockets supporting up to 256 GB (64 GB single DIMM capacity) of system memory
\nDual channel memory architecture<\/p>\n
Onboard Graphics:
\nIntegrated Graphics Processor-Intel\u00ae HD Graphics support:
\n– 1 x USB4\u00ae USB Type-C\u00ae port, supporting USB4 and DisplayPort video outputs and a maximum resolution of 3840×2160@144 Hz
\n– 1 x DisplayPort, supporting a maximum resolution of 3840×2160@144 Hz<\/p>\n
Audio:
\nRealtek\u00ae Audio CODEC
\nHigh Definition Audio
\n2\/4\/5.1\/7.1-channel<\/p>\n
LAN: Realtek\u00ae 2.5GbE LAN chip (2.5 Gbps\/1 Gbps\/100 Mbps)<\/p>\n
Expansion Slots
\nCPU: – 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
\n* The PCIEX16 slot can only support a graphics card or an NVMe SSD. If only one graphics card is to be installed, be sure to install it in the PCIEX16 slot.<\/p>\n
Chipset: – 2 x PCI Express x16 slots, supporting PCIe 4.0 and running at x4 (PCIEX4_1\/2)<\/p>\n
Storage Interface
\nCPU: – 1 x M.2 connector (Socket 3, M key, type 25110\/22110\/2580\/2280
\nPCIe 5.0 x4\/x2 SSD support) (M2A_CPU)
\n– 1 x M.2 connector (Socket 3, M key, type 22110\/2280
\nPCIe 4.0 x4\/x2 SSD support) (M2B_CPU)
\nChipset: – 1 x M.2 connector (Socket 3, M key, type 22110\/2280 PCIe 4.0 x4\/x2 SSD support) (M2Q_SB)
\n– 1 x M.2 connector (Socket 3, M key, type 22110\/2280 SATA and PCIe 4.0 x4\/x2 SSD support) (M2M_SB)
\n– 4 x SATA 6Gb\/s connectors
\nRAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
\nRAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices<\/p>\n
USB
\nCPU: – 1 x USB4\u00ae USB Type-C\u00ae port on the back panel
\nChipset: – 1 x USB Type-C\u00ae port with USB 3.2 Gen 2 support, available through the internal USB header
\n– 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
\n– 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)
\nChipset+2 USB 2.0 Hubs: – 8 x USB 2.0\/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)<\/p>\n
Internal I\/O Connectors:
\n1 x 24-pin ATX main power connector
\n2 x 8-pin ATX 12V power connectors
\n1 x CPU fan header
\n1 x CPU fan\/water cooling pump header
\n3 x system fan headers
\n1 x system fan\/water cooling pump header
\n3 x addressable RGB Gen2 LED strip headers
\n1 x RGB LED strip header
\n4 x M.2 Socket 3 connectors
\n4 x SATA 6Gb\/s connectors
\n1 x front panel header
\n1 x front panel audio header
\n1 x USB Type-C\u00ae header, with USB 3.2 Gen 2 support
\n1 x USB 3.2 Gen 1 header
\n2 x USB 2.0\/1.1 headers
\n2 x Thunderbolt\u2122 add-in card connectors (For GIGABYTE Thunderbolt\u2122 5 add-in card only)
\n1 x Trusted Platform Module header (For the GC-TPM2.0 SPI\/GC-TPM2.0 SPI 2.0\/GC-TPM2.0 SPI V2 module only)
\n1 x power button
\n1 x Q-Flash Plus button
\n1 x reset button
\n1 x reset jumper
\n1 x Clear CMOS jumper<\/p>\n
Back Panel Connectors:
\n1 x USB4\u00ae USB Type-C\u00ae port (DisplayPort (Note))
\n2 x USB 3.2 Gen 2 Type-A ports (red)
\n3 x USB 3.2 Gen 1 ports
\n4 x USB 2.0\/1.1 ports
\n1 x DisplayPort (Note)
\n2 x antenna connectors (2T2R)
\n1 x RJ-45 port
\n3 x audio jacks
\n(Note) Actual support may vary by CPU.<\/p>\n
Operating System: Support for Windows 11 64-bit
\nForm Factor: ATX Form Factor; 30.5cm x 24.4cm<\/p>","protected":false},"excerpt":{"rendered":"